INITIAL
DRAIN TREATMENT-Treat your drains with Fuller Brush Drain Line &
Septic Tank Cleaner for three days in a row.
1. Run warm water into the drain before treatment.
2. Pour 1-1/2 to 3 ounces of Fuller Drain Line & Septic Tank
Cleaner down the drain.
3. If the area of build-up is beyond the drain where the cleaner is
added, a minimal amount of water should be added to sweep the
treatment into the problem area.
FOR BEST RESULTS-Do not run water
for 6 to 8 hours. It may be easiest to apply treatment at bedtime
or before leaving for the day. If tough drains still run slow after
initial use, plunge and repeat 3-day start-up treatment.
If you wish to treat several drains
in a multi-story building, treat lowest drain first to prevent
dislodged materials from clogging drains on lower
floors.
TO KEEP PIPES RUNNING CLEAR-Repeat
treatment every two to four weeks.
SEPTIC TANK TREATMENT-For a 1000 to
1500 gallon capacity septic tank, flush one half bottle (16 ounces)
down the toilet bowl each month. For other sizes of septic tanks,
adjust treatment accordingly.